What size nut does a 9/16 wrench fit?
John Peck 
US Bolt Head/Wrench Size
| Bolt Diameter | Head and Wrench Size | |
|---|---|---|
| Hex Bolt - Lag Bolt - Square Bolt | Heavy Hex Bolt | |
| 5/16" | 1/2" | - |
| 3/8" | 9/16" | - |
| 7/16" | 5/8" | - |
Also know, how do you determine what size nut you need?
Stretch the tape measure across the nut's diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut.
Secondly, what size nut goes on a 1/4 bolt? US Nut Size Table
| Size | Diameter* | |
|---|---|---|
| Hex Nut | Machine Screw Nut | |
| #3 | - | 3/16" |
| #4 | - | 1/4" |
| #6 | - | 5/16" |
Also, what size nut fits a 15mm socket?
The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.
What size socket fits a 22mm nut?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| 7/16"BSW | 21.29 | |
| 21mm | 21.46 | |
| M14 | 22mm | 22.46 |
| 1/2"UNC | 7/8" | 22.68 |
What size nut uses a 1/2 wrench?
US Bolt Head/Wrench Size
| Bolt Diameter | Head and Wrench Size | |
|---|---|---|
| Hex Bolt - Lag Bolt - Square Bolt | Heavy Hex Bolt | |
| 5/16" | 1/2" | - |
| 3/8" | 9/16" | - |
| 7/16" | 5/8" | - |
What's the next size up from 9 16?
Wrench Size Chart for Bolts
| Bolt Diameter | Wrench Size (Standard) | Wrench Size (Metric) |
|---|---|---|
| 7/16" | 5/8" | 16mm |
| 1/2" | 3/4" | 19mm |
| 9/16" | 13/16" | 21mm |
| 5/8" | 15/16" | 24mm |
How can you tell the size of a screw?
How to Determine Screw Size & Thread Count- Lay the screw down on a flat surface.
- Place a steel rule down the axis of the screw.
- Count the number of thread gaps within 1 inch of the screw.
- Divide the count of thread gaps into the length.
- Place the screw on a flat surface.
- Lay a steel rule between two screw threads and measure across the diameter.
What size is m8 nut?
13 mm
How do you measure a lug pattern?
Measuring Your Bolt Pattern- Remove the existing wheel (the rear wheel is usually the easiest to measure because the hub normally won't be in the way).
- Measure from the middle of one stud to the outside of the second stud (skipping a stud).
- The number you see will be the actual measurement of the bolt pattern.
What are standard bolt sizes?
US Standard Thread Length for Bolts
| Bolt Diameter | Standard Thread Length (in.) * | |
|---|---|---|
| Bolts 6 inches and shorter | Bolts longer than 6 inches | |
| 1/4" | 3/4" | 1" |
| 5/16" | 7/8" | 1-1/8" |
| 3/8" | 1" | 1-1/4" |
How do bolt sizes work?
There are usually three key numbers regarding bolt specifications, whether its metric or SAE. A typcial SAE fastener would be like 1/4–20 x 2 which specifies a 1/4″ diameter with 20 threads per inch and 2″ long. Diameters are fractions of an inch like 1/4″, 5/16, 3/8, 1/2 etc.How do you measure nut width?
Slide a flat ruler under the strings of the first fret, and read from from the two outside edges of the nut. Proud supporter AGF, LTG, & ICW! It is usually expressed "neck width at nut". You measure the nut from it's outer edges.What size nut fits a 12mm socket?
Metric Bolt Head/Wrench Size
| Bolt Diameter (mm) | Head/Wrench Size (mm) | |
|---|---|---|
| ANSI/ISO | DIN/ISO Heavy Hex | |
| 12 | 18 | 22/21* |
| 14 | 21 | - |
| 16 | 24 | 27 |
What size hole do I need for an m12 bolt?
Metric Threads
| Thread | Drill size for tapping standard metric threads | Clearance hole |
|---|---|---|
| M10 | 8.5 | 11 |
| M12 | 10.2 | 13.5 |
| M14 | 12 | 15.5 |
| M16 | 14 | 17.5 |
What size Bolt uses a 10mm socket?
A standard 6mm hex cap screw should have a 10mm head.What is M in bolt size?
The "M" designation for metric screws indicates the nominal outer diameter of the screw, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).What size is m12 nut?
M12 (12mm) Thread Size. 9.64mm - 10.00mm Nut Thickness (T)What does M stand for in bolt sizes?
metric
What size nut fits a 13mm socket?
The nut takes a 13mm spanner, (which suggests M8), the length of the whole thing is approx. 25mm, and the threaded bit is approx. 21mm. The outside diameter of the threads is approx.What size bolt has a 7 8 head?
Hex Bolt Head Size Chart
| Diameter | Head Size |
|---|---|
| 1/4" | 7/16" |
| 5/16" | 1/2" |
| 3/8" | 9/16" |
| 7/16" | 5/8" |
What size nut is m10?
10mm
